Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 247)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 8.47
show system environment
This command displays the current environmental status of your device and any attached
PSU, XEM, or other expansion option. The environmental status covers information about
temperatures, fans, and voltage.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show system environment
Mode User Exec and Privileged Exec
Usage For a stacked configuration, if this command is entered on the stack master, it will display
the information for all the stack members. A stack member heading will be displayed to
distinguish the different information for every stack member.
Example To display the system’s environmental status, use the command:
Output Figure 8-18: Example output from the show system environment command
Related Commands show system
awplus# show system environment
Stack Environment Monitoring Status
Stack member 1:
Overall Status: Normal
Resource ID: 1 Name: x 310-26FP
ID Sensor (Units) Reading Low Limit High Limit Status
1 Fan: Fan 1 (Rpm) 4344 3000 - Ok
2 Voltage: 1.8V (Volts) 1.804 1.617 1.978 Ok
3 Voltage: 1.0V (Volts) 0.995 0.896 1.099 Ok
4 Voltage: 3.3V (Volts) 3.291 2.960 3.613 Ok
5 Voltage: 5.0V (Volts) 5.066 4.477 5.498 Ok
6 Voltage: 1.2V (Volts) 1.187 1.072 1.318 Ok
7 Temp: CPU (Degrees C) 50 -10 90 Ok