Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1470)

DHCP Snooping Commands
Software Reference for x310 Series Switches
56.32 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip dhcp snooping acl
Use this command to display information about the Access Control Lists (ACL) that are
using the DHCP snooping database.
Syntax show ip dhcp snooping acl
show ip dhcp snooping acl [detail|hardware] [interface
[<interface-list>]]
Mode User Exec and Privileged Exec
Example To display DHCP snooping ACL information, use the command:
To display DHCP snooping hardware ACL information, use the command:
Parameter Description
detail Detailed DHCP Snooping ACL information.
hardware DHCP Snooping hardware ACL information.
interface ACL Interface information.
<interface-list> The interfaces to display information about.
awplus# show ip dhcp snooping acl
Figure 56-8: Example output from the show ip dhcp snooping acl command
awplus#show ip dhcp snooping acl
DHCP Snooping Based Filters Summary:
Maximum Template Attached
Interface Bindings Bindings Filters Hardware Filters
-----------------------------------------------------------------
port1.0.1 1 520 0 0
port1.0.2 1 3 2 6
port1.0.3 1 2 4 8
port1.0.4 1 2 7 14
port1.0.5 0 2 6 12
port1.0.6 0 1 0 0
port1.0.7 0 1 0 0
port1.0.8 0 1 0 0
port1.0.9 0 1 0 0
port1.0.10 0 1 0 0
port1.0.11 0 1 0 0
port1.0.12 0 1 0 0
(port2.0.1 ) 0 520 0 0
(port2.0.2 ) 0 1 0 0
awplus# show ip dhcp snooping acl hardware