Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1056)

QoS Commands
Software Reference for x310 Series Switches
39.50 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
wrr-queue disable queues
Use this command to disable an egress queue from transmitting traffic.
The no variant of this command enables an egress queue to transmit traffic.
Syntax wrr-queue disable queues [0][1][2][3][4][5][6][7]
no wrr-queue disable queues [0][1][2][3][4][5][6][7]
Mode Interface Configuration
Examples To enable queue 1 to transmit traffic, use the commands:
To disable queue 1 from transmitting traffic, use the commands:
Related Commands show mls qos interface
Parameter Description
[0][2]...[7] Selects one or more queues numbered 0 to 7.
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# no wrr-queue disable queues 1
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# wrr-queue disable queues 1