Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 222)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.22 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
no debug all
This command disables the debugging facility for all features on your device. This stops
the device from generating any diagnostic debugging messages.
The debugging facility is disabled by default.
Syntax no debug all [dot1x|ipv6|nsm]
Mode Global Configuration and Privileged Exec
Example To disable debugging for all features, use the command:
To disable all 802.1X debugging, use the command:
To disable all IPv6 debugging, use the command:
To disable all NSM debugging, use the command:
Related Commands undebug all
Parameter Description
dot1x
Turns off all debugging for IEEE 802.1X port-based network access-
control.
ipv6
Turns off all debugging for IPv6 (Internet Protocol version 6).
nsm
Turns off all debugging for the NSM (Network Services Module).
awplus# no debug all
awplus# no debug all
awplus# no debug all
awplus# no debug all