Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 2154
Stacking Commands
Software Reference for x310 Series Switches
83.14
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Table 83-4: Parameters in the output from the show stack detail command
Parameter
Description
Auto upgrade
Whether the software-auto-configuration feature is turned on,
or off.
Host name
The host name of the stack member.
ID
Stack-ID and line card or control card slot.
Last Role
Change
The date and time with the stack member last changed its role
in the stack.
MAC address
Stack member MAC address.
Management VLAN
ID
The VLAN ID currently used for stack management: Default is
4094.
Management VLAN
subnet address
The current stacking management VLAN subnet address.
Virtual Chassis
ID
The Virtual Chassis ID determines the last 12 bits of the Virtual
MAC address: 0000.cd37.0xxx
Virtual MAC
Address
The Virtual MAC address of the stack.
Disabled Master
Monitoring
The current Disabled Master Monitoring status. This can be:
■
Enabled
■
Disabled
■
Inactive
Operational
Status
The status of the stack. This can be:
■
Normal operation:
If any other status is displayed, it may warrant further
investigation.
■
Stacking hardware disabled:
The
command needs to be added to the
configuration to activate the stacking feature.
■
Operating in failover mode:
This stack member has become separated from the rest of
the stack, or it failed to join the stack correctly.
■
Standalone unit:
Stacking is enabled, but no other stack members are present
■
Not all stack ports are up:
One or more stacking ports may be down, or stacking
discovery may not have detected the neighbor successfully.
Stack Status
The stack’s overall status. Note that a warning is issued if the
stack is not connected in a standard ring topology.
Pending ID
The pending stack member ID. This can be changed by the
stack renumber command on page 83.22
. If there is no
pending ID, the “-” symbol will display.
Stack port
status
The status of the stack port. This can be:
■
Down
■
Neighbor incompatible
■
Discovering neighbor
■
Learnt neighbor