Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1836

SNMP MIBs

Software Reference for x310 Series Switches

69.24

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

atEnvMonv2FanStatus
{ atEnvMonv2FanEntry 7 }

Whether this fan is currently in an alarm condition. The
values can be:

1. Failed. Means that the current speed is too low.

2. Good. Means that the current speed is acceptable.

atEnvMonv2VoltageTable
{ atEnvMonv2 2 }

Table of information about voltage rails in the device that
are monitored by environment monitoring hardware,
indexed by:

1. atEnvMonv2VoltageStackMemberId

■

atEnvMonv2VoltageBoardIndex

■

atEnvMonv2VoltageIndex

atEnvMonv2VoltageEntry
{ atEnvMonv2VoltageTable 1 }

Description, current value, upper & lower threshold
settings and current status of a single voltage rail.

atEnvMonv2VoltageStackMemberId
{ atEnvMonv2VoltageEntry 1 }

Index of the stack member hosting this voltage sensor.

atEnvMonv2VoltageBoardIndex
{ atEnvMonv2VoltageEntry 2 }

Index of the board hosting this voltage sensor in the board
table.

atEnvMonv2VoltageIndex
{ atEnvMonv2VoltageEntry 3 }

Numeric identifier of this voltage rail on its host board.

atEnvMonv2VoltageDescription
{ atEnvMonv2VoltageEntry 4 }

Description of this voltage rail.

atEnvMonv2VoltageCurrent
{ atEnvMonv2VoltageEntry 5 }

Current reading of this voltage rail in millivolts.

atEnvMonv2VoltageUpperThreshold
{ atEnvMonv2VoltageEntry 6 }

Maximum acceptable reading of this voltage rail in
millivolts.

atEnvMonv2VoltageLowerThreshold
{ atEnvMonv2VoltageEntry 7 }

Minimum acceptable reading of this voltage rail in
millivolts.

atEnvMonv2VoltageStatus
{ atEnvMonv2VoltageEntry 8 }

Whether this voltage rail is currently in an alarm condition.
Possible values are:

1. outOfRange (1) - means that the current reading is

outside the threshold range.

2. inRange (2) - means that the current reading is

acceptable.

atEnvMonv2TemperatureTable
{ atEnvMonv2 3 }

Table of information about temperature sensors in the
device that are monitored by environment monitoring
hardware, indexed by:

1. atEnvMonv2TemperatureStackMemberId

2. atEnvMonv2TemperatureBoardIndex
3. atEnvMonv2TemperatureIndex
4. atEnvMonv2TemperatureDescription
5. atEnvMonv2TemperatureCurrent
6. atEnvMonv2TemperatureUpperThreshold
7. atEnvMonv2TemperatureStatus

atEnvMonv2TemperatureEntry
{ atEnvMonv2TemperatureTable 1 }

Description, current value, upper threshold setting and
current status of a single temperature sensor.

atEnvMonv2TemperatureStackMemberId
{ atEnvMonv2TemperatureEntry 1 }

Index of the stack member hosting this temperature
sensor.

atEnvMonv2TemperatureBoardIndex
{ atEnvMonv2TemperatureEntry 2 }

Index of the board hosting this temperature sensor in the
board table.

Table 69-8: Objects defined in AT-ENVMONV2-MIB(cont.)

Object / Object Identifier

Description