Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 253

System Configuration and Monitoring Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

8.53

Example

To display information about the pluggable transceiver installed in port1.0.1, use the
command:

Output

Figure 8-24: Example output from the show system pluggable port1.0.1 command

Table 8-7: Parameters in the output from the show system pluggables command

Related Commands

show system environment
show system pluggable detail
show system pluggable diagnostics

awplus#

show system pluggable port1.0.1

System Pluggable Information
Port Manufacturer Device Serial Number Datecode Type
--------------------------------------------------------------------------------
1.0.1 AGILENT HFBR-5710L 0401312315461272 040131 1000BASE-SX
--------------------------------------------------------------------------------

Parameter

Description

Stack member

The stack member number.

Port

Specifies the vendor’s name for the installed pluggable
transceiver.

Vendor Name:

Specifies the vendor’s name for the installed pluggable
transceiver.

Device Name:

Specifies the device name for the installed pluggable
transceiver.

Device Type:

Specifies the device type for the installed pluggable
transceiver.

Serial Number

Specifies the serial number for the installed pluggable
transceiver.

Manufacturing
Datecode

Specifies the manufacturing datecode for the installed
pluggable transceiver. Checking the manufacturing
datecode with the vendor may be useful when
determining Laser Diode aging issues. See the

Trouble-

shoot fiber and pluggable issues

section in the

System

Configuration and Monitoring Commands

chapter.

SFP Laser

Wavelength:

Specifies the laser wavelength of the installed pluggable
transceiver.

Datecode