Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 695)

IPv6 Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 27.17
ipv6 nd suppress-ra
Use this command to inhibit IPv6 Router Advertisement (RA) transmission for the current
interface. Router advertisements are used when applying IPv6 stateless auto-
configuration.
Use no parameter with this command to enable Router Advertisement transmission.
Syntax ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Default Router Advertisement (RA) transmission is suppressed by default.
Mode Interface Configuration for a VLAN interface.
Example To enable the transmission of router advertisements from the VLAN interface vlan4 on
the switch, use the following commands:
Related Commands ipv6 nd ra-interval
ipv6 nd prefix
awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# no ipv6 nd suppress-ra