Dot1x initialize supplicant – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1073

802.1X Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
41.7
dot1x initialize supplicant
This command removes authorization for a connected supplicant with the specified
MAC address or username. The connection will attempt to re-authorize when the
specified supplicant attempts to make use of the network connection.
Syntax
dot1x initialize supplicant {<macadd>|username}
Mode
Privileged Exec
Example
To initialize the supplicant authentication, use the commands
Validation
Commands
show dot1x
show dot1x supplicant
Related Commands
Note
Reauthentication could be a long time after the use of this command because
the reauthorization attempt is not triggered by this command. The attempt is
triggered by the first packet from the supplicant trying to access the network
resources.
Parameter
Description
dot1x
IEEE 802.1X Port-Based Access Control.
initialize
Initialize the port to attempt reauthentication.
supplicant
Specify the supplicant to initialize.
<macadd>
MAC (hardware address of the supplicant.
username
The name of the supplicant entry.
awplus#
configure terminal
awplus(config)#
dot1x initialize supplicant
0090.99ab.a020
awplus(config)#
dot1x initialize supplicant guest