Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1683)

NTP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 62.13
ntp trusted-key
This command defines a list of trusted authentication keys. If a key is trusted, this system
will be ready to synchronize to a system that uses this key in its NTP packets.
Use the no variant of this command to remove a configured trusted authentication key.
Syntax ntp trusted-key <1-4294967295>
no ntp trusted-key <1-4294967295>
Mode Global Configuration
Examples To define a trusted authentication key numbered 234675, use the following commands:
To remove the trusted authentication key numbered 234675, use the following
commands:
Parameter Description
<1-4294967295> The specific key number.
awplus# configure terminal
awplus(config)# ntp trusted-key 234676
awplus# configure terminal
awplus(config)# no ntp trusted-key 234676