Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1756)

DHCP for IPv6 (DHCPv6) Commands
Software Reference for x310 Series Switches
66.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show counter ipv6 dhcp-client
Use this command in User Exec or Privilege Exec mode to show DHCPv6 client counter
information.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show counter ipv6 dhcp-client
Mode User Exec and Privileged Exec
Example To display the DHCPv6 client counter information, use the command:
Output Figure 66-1: Example output from the show counter ipv6 dhcp-client command
awplus# show counter ipv6 dhcp-client
awplus#show counter ipv6 dhcp-client
SOLICIT out ......... 20
ADVERTISE in ......... 12
REQUEST out ......... 1
CONFIRM out ......... 0
RENEW out ......... 0
REBIND out ......... 0
REPLY in ......... 0
RELEASE out ......... 0
DECLINE out ......... 0
INFORMATION-REQUEST out ......... 0
Table 66-1: Parameters in the output of the show counter ipv6 dhcp-client command
Parameter Description
SOLICIT out Displays the count of SOLICIT messages sent by the DHCPv6 client.
ADVERTISE in Displays the count of ADVERTISE messages received by the DHCPv6
client.
REQUEST out Displays the count of REQUEST messages sent by the DHCPv6 client.
CONFIRM out Displays the count of CONFIRM messages sent by the DHCPv6
client.
RENEW out Displays the count of RENEW messages sent by the DHCPv6 client.
REBIND out Displays the count of REBIND messages sent by the DHCPv6 client.
REPLY in Displays the count of REPLY messages received by the DHCPv6
client.
RELEASE out Displays the count of RELEASE messages sent by the DHCPv6 client.
DECLINE out Displays the count of DECLINE messages sent by the DHCPv6 client.
INFORMATION-
REQUEST out Displays the count of INFORMATION-REQUEST messages sent by
the DHCPv6 client.