Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2049)

Trigger Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 77.29
type usb
Use this command to configure a trigger that activates on either the removal or the
insertion of a USB storage device.
Syntax type usb {in|out}
Mode Trigger Configuration
Usage USB triggers cannot execute script files from a USB storage device.
For example trigger configurations that use the type usb command, see “Capture Show
Output and Save to a USB Storage Device” on page 76.11 .
Examples To configure trigger 1 to activate on the insertion of a USB storage device, use the
commands:
Related Commands trigger
show running-config trigger
show trigger
undebug trigger
This command applies the functionality of the no debug trigger command.
Parameter Description
in Trigger activates on insertion of a USB storage device.
out Trigger activates on removal of a USB storage device.
awplus# configure terminal
awplus(config)# trigger 1
awplus(config-trigger)# type usb in