Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1635
AMF Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
60.47
Example-2
To display link diagnostic information, use the command
A typical output screen from this command is shown below:
Example-3
To display working-set consistency information, use the command
A typical output screen from this command is shown below:
If working-set consistency fails, the command will show the nodes which have failed to
join the working-set thus:
Related Commands
node2#
show atmf diagnostics links
================================================================
show atmf links
================================================================
AlliedWare Plus (TM) 0.0.0 02/26/14 11:13:41
================================================================
node1, node2, node3:
================================================================
Working set join
================================================================
node1:
================================================================
ATMF Link Brief Information:
Local Link Link ATMF Adjacent Adjacent Link
Port Type Status State Node Ifindex State
--------------------------------------------------------------------------------
sa1 Downlink Up Full node2 4502 Forwarding
sa2 Downlink Up Full node3 4502 Forwarding
======
node2:
======
...
node2#
show atmf diagnostics consistency
node1# show atmf diagnostics consistency
ATMF nodes: 9
Working set size: 9
node1# show atmf diagnostics consistency
Nodes missing from working set:
-node7
-node8