Show mls qos maps cos-queue, Show mls qos maps premark-dscp – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1048
QoS Commands
Software Reference for x310 Series Switches
39.42
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show mls qos maps cos-queue
Show the current configuration of the cos-queue map.
Syntax
show mls qos maps cos-queue
Mode
User Exec and Privileged Exec
Example
To display the current configuration of the cos-queue map, use the command:
Output
Figure 39-7: Example output from the show mls qos maps cos-queue command
Related Commands
show mls qos maps premark-dscp
This command displays the premark-dscp map. This map is used when the
command has been specified for a policy-map’s class-map to replace the DSCP, CoS,
queue, and bandwidth class of a packet matching the class-map based on a lookup DSCP
value.
Syntax
show mls qos maps premark-dscp [<0-63>]
Mode
User Exec and Privileged Exec
Example
To display the premark-dscp map for DSCP 1, use the command:
Output
Figure 39-8: Example output from the show mls qos maps premark-dscp command
Related Commands
mls qos map premark-dscp to
trust dscp
awplus#
show mls qos maps cos-queue
COS-TO-QUEUE-MAP:
COS : 0 1 2 3 4 5 6 7
--------------------------------
QUEUE: 0 7 1 3 4 5 6 7
Parameter Description
<0-63>
DSCP table entry.
awplus#
show mls qos maps premark-dscp 1
PREMARK-DSCP-MAP:
DSCP 1
Bandwidth Class Green Yellow Red
-------------------------------------------------
New DSCP 1 - -
New CoS 0 - -
New Queue 0 - -
New Bandwidth Class green - -