Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1977)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.51
show location
Use this command to display selected location information configured on the switch.
Syntax show location {civic-location|coord-location|elin-location}
show location {civic-location|coord-location|elin-location}
identifier {<civic-loc-id>|<coord-loc-id>|<elin-loc-id>}
show location {civic-location|coord-location|elin-location} interface
<port-list>
Mode User Exec and Privileged Exec
Examples To display a civic address location configured on port1.0.1, use the command:
To display coordinate location information configured on the identifier 1, use the
command:
Parameter Description
civic-location Display civic location information.
coord-location Display coordinate location information.
elin-location Display ELIN location information.
<civic-loc-id> Civic address location identifier, in the range 1 to 4095.
<coord-loc-id> Coordinate location identifier, in the range 1 to 4095.
<elin-loc-id> ELIN location identifier, in the range 1 to 4095.
<port-list> Ports to display information about.
awplus# show location civic-location interface port1.0.1
Figure 71-9: Example output from the show location command
awplus# show location civic-location interface port1.0.1
Port ID Element Type Element Value
----------------------------------------------------------------
1.0.1 1 Country NZ
City Christchurch
Street-suffix Avenue
House-number 27
Primary-road-name Nazareth
awplus# show location coord-location identifier 1