Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 766
IGMP Snooping Commands
Software Reference for x310 Series Switches
31.28
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
To ensure your VLAN is configured first: see
Examples
This example shows how to enable IGMP Snooping TCN Query Solicitation on a switch:
This example shows how to disable IGMP Snooping TCN Query Solicitation on a switch:
This example shows how to enable IGMP Snooping TCN Query Solicitation for the VLAN
interface vlan2:
This example shows how to disable IGMP Snooping TCN Query Solicitation for the VLAN
interface vlan2:
Validation
Commands
show ip igmp interface
show running-config
Related Commands
Note
This command will function on your switch in the stand-alone mode. but is not
supported when the switch forms part of a VCS Stack.
awplus#
configure terminal
awplus(config)#
ip igmp snooping tcn query solicit
awplus#
configure terminal
awplus(config)#
no ip igmp snooping tcn query solicit
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
ip igmp snooping tcn query solicit
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
no ip igmp snooping tcn query solicit