Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2029)

Trigger Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 77.9
show debugging trigger
This command displays the current status for trigger utility debugging. Use this command
to show when trigger debugging has been turned on or off from the
debug trigger
command.
Syntax show debugging trigger
Mode User Exec and Privileged Exec
Example To display the current configuration of trigger debugging, use the command:
Output Figure 77-1: Example output from the show debugging trigger command
Related Commands debug trigger
show running-config trigger
This command displays the current running configuration of the trigger utility.
Syntax show running-config trigger
Mode Privileged Exec
Example To display the current configuration of the trigger utility, use the command:
Output Figure 77-2: Example output from the show running-config trigger command
Related Commands show trigger
awplus# show debugging trigger
awplus#debug trigger
awplus#show debugging trigger
Trigger debugging status:
Trigger debugging is on
awplus#no debug trigger
awplus#show debugging trigger
Trigger debugging status:
Trigger debugging is off
awplus# show running-config trigger
trigger 1
type usb in
trigger 2
type usb out
!