Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1264)

RADIUS Introduction and Configuration
Software Reference for x310 Series Switches
46.14 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Specifying RADIUS Authentication
After you have identified the RADIUS server and defined the RADIUS authentication key,
you must define method lists for RADIUS authentication. Because RADIUS authentication
is facilitated through AAA, you must enter the
aaa authentication login command,
specifying RADIUS as the authentication method. For detailed aaa authentication login
command information, refer to the AAA Commands chapter.
Specifying RADIUS Accounting
The AAA accounting feature enables you to track the services users are accessing as well
as the amount of network resources they are consuming. Because RADIUS accounting is
facilitated through AAA, you must issue the
aaa accounting login command, specifying
RADIUS as the accounting method. For detailed aaa accounting login command
information, refer to the AAA Commands chapter.
Monitoring and Maintaining RADIUS
To monitor and maintain RADIUS, use the following commands in Privileged Exec mode:
Mode and Command Command Purpose
awplus#
debug radius
Displays information associated with
RADIUS.
For detailed
debug radius command
information, refer to the RADIUS
Commands chapter.
awplus#
show radius statistics
Displays the RADIUS statistics for
accounting and authentication packets.
For detailed
show radius statistics
command information, refer to the
RADIUS Commands chapter.