Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2143)

Stacking Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 83.3
Command List
clear counter stack
This command clears all stack counters for all stack members.
Syntax clear counter stack
Mode Privileged Exec
Example To clear all stack counters:
Related Commands show counter stack
debug stack
This command enables the stacking debugging facilities.
Syntax debug stack [link|topology|trace]
no debug stack [link|topology|trace]
Default Stack trace debugging is enabled.
Mode Privileged Exec and Global Configuration
Usage The command displays debug information about the stacked devices. If no parameter is
specified, all the stack debugging information will be displayed, including link events,
topology discovery messages and all notable stacking events. If link parameter is
specified, only the link events debugging information will be displayed.
Examples To enable debugging, enter the following command on the stack master:
To enable link debugging, enter the following command on the stack master:
To enable topology discovery debugging, enter the following command on the stack
master:
To enable stack trace debugging, enter the following command on the stack master:
Related Commands undebug stack
awplus# clear counter stack
Parameter Description
link Stacking neighbor discovery events on stack links.
topology Stacking topology discovery messages.
trace Notable stacking events.
awplus# debug stack
awplus# debug stack link
awplus# debug stack topology
awplus# debug stack trace