Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 135

Creating and Managing Files

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

6.11

In the example output below, the no boot-config command has been used to delete the
configuration file my.cfg on the USB storage device. The backup configuration file
backup.cfg in Flash then becomes the current boot config.

In the example output below, the no boot-config backup command has been used to
delete the backup configuration file backup.cfg. The default configuration file default.cfg
then becomes the current boot config.

If the current boot configuration file is set on a USB storage device and then this device
has been removed from the switch, the Current boot config parameter field indicates that
this file cannot be found, as shown in the following example output.

At system startup the switch will load the backup configuration file as the startup-config.

awplus#show boot
Boot configuration
----------------------------------------------------------------
Current software : x310-5.4.4C.rel
Current boot image : usb:/x310-5.4.4C.rel
Backup boot image : flash:/x310-5.4.4C.rel
Default boot config: flash:/default.cfg
Current boot config: flash:/backup.cfg (file exists)
Backup boot config: flash:/backup.cfg (file exists)

awplus#show boot
Boot configuration
----------------------------------------------------------------
Current software : x310-5.4.4C.rell
Current boot image : usb:/x310-5.4.4C.rel
Backup boot image : flash:/x310-5.4.4C.rel
Default boot config: flash:/default.cfg
Current boot config: flash:/default.cfg (file exists)
Backup boot config: Not set

awplus#show boot
Boot configuration
----------------------------------------------------------------
Current software : x310-5.4.4C.rel
Current boot image : usb:/x310-5.4.4C.rel
Backup boot image : flash:/x310-5.4.4C.rel
Default boot config: flash:/default.cfg
Current boot config: usb:/my.cfg (file not found)
Backup boot config: flash:/backup.cfg (file exists)