Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1476)

DHCP Snooping Commands
Software Reference for x310 Series Switches
56.38 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip dhcp snooping statistics
Use this command to display DHCP snooping statistics.
Syntax show ip dhcp snooping statistics [detail] [interface
<interface-list>]
Mode User Exec and Privileged Exec
Example To show the current DHCP snooping statistics for all interfaces, use the command:
Parameter Description
detail Display detailed statistics.
interface
<interface-list> Display statistics for the specified interfaces. The interface list
can contain switch ports, static or dynamic link aggregators
(channel groups), or VLANs.
awplus# show ip dhcp snooping statistics
Figure 56-14: Example output from the show ip dhcp snooping statistics command
awplus# show ip dhcp snooping statistics
DHCP Snooping Statistics:
In In BOOTP In BOOTP In
Interface Packets Requests Replies Discards
----------------------------------------------------------------
vlan1 444 386 58 223
port1.0.1 386 386 0 223
port1.0.2 0 0 0 0
port1.0.3 0 0 0 0
port1.0.4 0 0 0 0
port1.0.5 0 0 0 0
port1.0.6 58 0 58 0