Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 251)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 8.51
show system pci tree
Use this command to display the PCI tree on your switch.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show system pci tree
Mode User Exec and Privileged Exec
Example To display information about the PCI tree on your switch, use the command:
Output Figure 8-22: Example output from the show system pci tree command
Related Commands show system environment
show system pci device
awplus# show system pci tree
awplus>show system pci tree
-[00]-+-0c.0 11ab:00d1
\-0d.0 11ab:00d1