Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 438)

VLAN Commands
Software Reference for x310 Series Switches
17.10 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show vlan classifier interface group
Use this command to display information about all interfaces configured for a VLAN group
or all the groups.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show vlan classifier interface group [<1-16>]
Mode User Exec and Privileged Exec
Usage If a group ID is not specified, all interfaces configured for all VLAN classifier groups are
shown. If a group ID is specified, the interfaces configured for this VLAN classifier group
are shown.
Example To display information about all interfaces configured for all VLAN groups, enter the
command:
To display information about all interfaces configured for VLAN group 1, enter the
command:
Output Figure 17-4: Example output from the show vlan classifier interface group command
Output Figure 17-5: Example output from the show vlan classifier interface group 1
command
Related Commands vlan classifier group
show vlan classifier group interface
Parameter Description
<1-16> VLAN classifier interface group identifier
awplus# show vlan classifier interface group
awplus# show vlan classifier interface group 1
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
vlan classifier group 2 interface port1.0.3
vlan classifier group 2 interface port1.0.4
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2