Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 369)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.7
clear port counter
Use this command to clear the packet counters of the port.
Syntax clear port counter [<port>]
Mode Privileged Exec
Example To clear the packet counter for port1.0.1, use the command:
Related Commands show platform port
debug loopprot
This command enables Loop Protection debugging.
The no variant of this command disables Loop Protection debugging.
Syntax debug loopprot {info|msg|pkt|state|nsm|all}
no debug loopprot {info|msg|pkt|state|nsm|all}
Mode Privileged Exec and Global Configuration
Example To enable debug for all state transitions, use the command:
Related Commands show debugging loopprot
undebug loopprot
Parameter Description
The port number or range
awplus# clear port counter port1.0.1
Parameter Description
info General Loop Protection information.
msg Received and transmitted Loop Detection Frames (LDFs).
pkt Echo raw ASCII display of received and transmitted LDF packets to
the console.
state Loop Protection states transitions.
nsm Network Service Module information.
all All debugging information.
awplus# debug loopprot state