Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1479)

DHCP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 56.41
show ip source binding
Use this command to display static entries in the DHCP snooping database. These are the
entries that have been added by using the
ip source binding command on page 56.23 .
Syntax show ip source binding
Mode User Exec and Privileged Exec
Example To display static entries in the DHCP snooping database information, use the command:
Related Commands ip source binding
show ip dhcp snooping binding
awplus# show ip source binding
Figure 56-16: Example output from the show ip source binding command
awplus# show ip source binding
IP Source Bindings:
Client MAC Expires
IP Address Address VLAN Port (sec) Type
----------------------------------------------------------------------
1.1.1.1 0000.1111.2222 1 port1.0.1 Infinite Static
Table 56-7: Parameters in the output from the show ip source binding command
Parameter Description
Client IP Address The IP address of the DHCP client.
MAC Address The MAC address of the DHCP client.
VLAN The VLAN ID the packet is received on.
Port The Layer 2 port name the packet is received on.
Expires (sec) Always infinite for static bindings, or when the leave time in
the DHCP message was 0xffffffff (infinite).
Type DHCP Snooping binding type: Static