Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 281)

Logging Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 10.9
Default By default the buffered log has a filter to select messages whose severity level is “notices
(5)” or higher. This filter may be removed using the no variant of this command.
Mode Global Configuration
Examples To add a filter to send all messages generated by EPSR that have a severity of notices or
higher to the buffered log use the following commands:
To add a filter to send all messages containing the text “Bridging
initialization”
, to the buffered log use the following commands:
To remove a filter that sends all messages generated by EPSR that have a severity of
notices
or higher to the buffered log use the following commands:
facility Filter messages to the buffered log by syslog facility.
<facility> Specify one of the following syslog facilities to include messages
from in the buffered log:
kern Kernel messages
user Random user-level messages
mail Mail system
daemon System daemons
auth Security/authorization messages
syslog Messages generated internally by syslogd
lpr Line printer subsystem
news Network news subsystem
uucp UUCP subsystem
cron Clock daemon
authpriv Security/authorization messages (private)
ftp FTP daemon
msgtext Select messages containing a certain text string (maximum 128
characters).
<text-
string> A text string to match (maximum 128 characters). This is case
sensitive, and must be the last text on the command line.
Parameter Description
awplus# configure terminal
awplus(config)# log buffered level notices program epsr
awplus# configure terminal
awplus(config)# log buffered msgtext Bridging initialization
awplus# configure terminal
awplus(config)# no log buffered level notices program epsr