Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2023)

Trigger Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 77.3
day
This command specifies the days or date that the can trigger activate on. You can specify
either:
■ A specific date
■ A specific day of the week
■ A list of days of the week
■ every day
By default, the trigger can activate on any day.
Syntax day every-day
day <1-31> <month> <2000-2035>
day <weekday>
Mode Trigger Configuration
Usage For example trigger configurations that use the day command, see “Restrict Internet
Access” on page 76.2 and “Turn Off Power to Port LEDs” on page 76.7 .
Examples To permit trigger 55 to activate on the 1 Jun 2010, use the commands:
To permit trigger 12 to activate on a Mondays, Wednesdays and Fridays, use the
commands:
Related Commands show trigger
trigger
Parameter Description
every-day Sets the trigger so that it can activate on any day.
<1-31> Day of the month the trigger is permitted to activate on.
<month> Sets the month that the trigger is permitted to activate on. Valid
keywords are: january, february, march, april, may, june, july,
august, september, october, november, and december.
<2000-2035> Sets the year that the trigger is permitted to activate in.
<weekday> Sets the days of the week that the trigger can activate on. You can
specify one or more week days in a space separated list. Valid
keywords are: monday, tuesday, wednesday, thursday, friday,
saturday, and sunday.
awplus# configure terminal
awplus(config)# trigger 55
awplus(config-trigger)# day 1 Jun 2010
awplus# configure terminal
awplus(config)# trigger 12
awplus(config-trigger)# day monday wednesday friday