Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1938)

LLDP Commands
Software Reference for x310 Series Switches
71.12 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
lldp notification-interval
This command sets the notification interval. This is the minimum interval between LLDP
SNMP notifications (traps) of each kind (LLDP Remote Tables Change Notification and
LLDP-MED Topology Change Notification).
The no variant of this command sets the notification interval back to its default.
Syntax lldp notification-interval <5-3600>
no lldp notification-interval
Default The default notification interval is 5 seconds.
Mode Global Configuration
Examples To set the notification interval to 20 seconds, use the commands:
To set the notification interval back to its default, use the commands:
Related Commands lldp notifications
show lldp
Parameter Description
<5-3600> The interval in seconds.
awplus# configure terminal
awplus(config)# lldp notification-interval 20
awplus# configure terminal
awplus(config)# no lldp notification-interval