Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1351)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 51.23
server auth-port
Use this command to change the UDP port number for local RADIUS server
authentication.
Use the no variant of this command to reset the RADIUS server authentication port back
to the default.
Syntax server auth-port <1-65535>
no server auth-port
Default The default local RADIUS server UDP authentication port number is 1812.
Mode RADIUS Server Configuration
Examples The following commands set the RADIUS server authentication port to 10000.
The following commands reset the RADIUS server authentication port back to the default
UDP port of 1812.
Related Commands server enable
show radius local-server statistics
Parameter Description
<1-65535> UDP port number.
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# server port 10000
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# no server port