Reboot, Reload, Reboot reload – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 223
System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
8.23
reboot
This command halts the device and performs a cold restart (also known as reload). It
displays a confirmation request before restarting.
You can reboot a stand-alone device, a stack, or a specified stack member.
Syntax
reboot <stack-ID>
reload <stack-ID>
reboot
reload
Mode
Privileged Exec
Usage
The reboot and reload commands perform the same action.
When restarting the whole stack, you can either use this reboot command to reboot all
stack members immediately, or to minimize downtime, reboot the stack members in a
rolling sequence by using the
reboot rolling command on page 83.5
Examples
To restart the stand-alone device, use the command:
To restart all devices in the stack, use the command:
To restart stack member 3, use the command:
If the specified stack member ID does not exist in the current stack, the command is
rejected.
Related Commands
reload
This command performs the same function as the
.
Parameter
Description
<stack-ID>
Stack member number, from 1 to 4.
awplus#
reboot
reboot system? (y/n):
y
awplus#
reboot
Are you sure you want to reboot the whole stack? (y/n):
y
awplus#
reboot stack-member 3
reboot stack-member 3 system? (y/n):
y