Ip igmp snooping mrouter – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 760
IGMP Snooping Commands
Software Reference for x310 Series Switches
31.22
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
ip igmp snooping mrouter
Use this command to statically configure the specified port as a multicast router port for
IGMP Snooping for an interface. This command applies to interfaces configured for IGMP
Snooping.
Use the no variant of this command to remove the static configuration of the port as a
multicast router port.
Syntax
ip igmp snooping mrouter interface <port>
no ip igmp snooping mrouter interface <port>
Mode
Interface Configuration for a VLAN interface.
Usage
Ensure your VLAN is configured first: see
Example
This example shows the switch port interface port1.0.2 statically configured to be a
multicast router interface for the VLAN interface vlan2:
Related Commands
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
ip igmp snooping mrouter interface port1.0.2