Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1802)

SNMP Commands
Software Reference for x310 Series Switches
68.20 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
snmp-server engineID local reset
Use this command to force the switch to generate a new pseudo-random SNMPv3 engine
ID by resetting the SNMPv3 engine. If the current engine ID is user defined, use the
snmp-
server engineID local command to set SNMPv3 engine ID to a system generated value.
Syntax snmp-server engineID local reset
Mode Global Configuration
Example To force the SNMPv3 engine ID to be reset to a system generated value, use the
commands:
Validation
Commands
show snmp-server
Related Commands snmp-server engineID local
awplus# configure terminal
awplus(config)# snmp-server engineID local reset