Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1983)

SMTP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 72.5
mail from
This command sets an email address for the “mail from” SMTP command. You must specify
a sending email address with this command before you can send any email.
Syntax mail from <from>
Mode Global Configuration
Example To set the email address you are sending mail from to “[email protected], use the command:
Related Commands delete mail
mail
mail smtpserver
show mail
mail smtpserver
This command sets the IP address of the SMTP server that your device sends email to. You
must specify a mail server with this command before you can send any email.
Syntax mail smtpserver <ip-address>
Mode Global Configuration
Example To specify a mail server at 192.168.0.1, use the command:
Related Commands debug mail
delete mail
mail
mail from
show mail
show counter mail
Parameter Description
<from> The email address that the mail is sent from.
awplus(config)# mail from [email protected]
Parameter Description
<ip-address> Internet Protocol (IP) Address for the mail server specified.
awplus# mail smtpserver 192.168.0.1