Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1797)

SNMP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 68.15
snmp-server contact
This command sets the contact information for the system. The contact name is:
■ displayed in the output of the show system command
■ stored in the MIB object sysContact
The no variant of this command removes the contact information from the system.
Syntax snmp-server contact <contact-info>
no snmp-server contact
Mode Global Configuration
Example To set the system contact information to “[email protected]”, use the command:
Related Commands show system
snmp-server location
snmp-server group
Parameter Description
The contact information for the system, from 0 to 255 characters
long. Valid characters are any printable character and spaces.
awplus# configure terminal
awplus(config)# snmp-server contact [email protected]