Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1170)

Authentication Commands
Software Reference for x310 Series Switches
43.44 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
auth-web-server http-redirect
This command enables the HTTP redirect feature on every interface on which web-based
port authentication is enabled. When the HTTP redirect feature is enabled, any HTTP
request received on an unauthorized interface is redirected to the web authentication
server automatically.
Use the no variant of this command to disable the HTTP redirect feature.
Syntax auth-web-server http-redirect
no auth-web-server http-redirect
Default The HTTP redirect feature is enabled by default.
Mode Global Configuration
Examples To disable the HTTP redirect feature, use the following commands:
To re-enable the HTTP redirect feature, use the following commands:
Validation
Commands
show auth-web
show auth-web-server
show running-config
awplus# configure terminal
awplus(config)# no auth-web-server http-redirect
awplus# configure terminal
awplus(config)# auth-web-server http-redirect