Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1468)

DHCP Snooping Commands
Software Reference for x310 Series Switches
56.30 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show debugging arp security
Use this command to display the ARP security debugging configuration.
Syntax show debugging arp security
Mode User and Privileged Exec
Example To display the debugging settings for ARP security on the switch, use the command:
Related Commands arp security violation
debug arp security
show debugging ip dhcp snooping
Use this command to display the DHCP snooping debugging configuration.
Syntax show debugging ip dhcp snooping
Mode User Exec and Privileged Exec
Example To display the DHCP snooping debugging configuration, use the command:
Related Commands debug ip dhcp snooping
show log
awplus# show debugging arp security
Figure 56-5: Example output from the show debugging arp security command
awplus# show debugging arp security
ARP Security debugging status:
ARP Security debugging is off
awplus# show debugging ip dhcp snooping
Figure 56-6: Example output from the show debugging ip dhcp snooping command
awplus# show debugging ip dhcp snooping
DHCP snooping debugging status:
DHCP snooping debugging is off
DHCP snooping all debugging is off
DHCP snooping acl debugging is off
DHCP snooping binding DB debugging is off
DHCP snooping packet debugging is off
DHCP snooping detailed packet debugging is off