Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1181)

Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 43.55
auth-web-server redirect-delay-time
Use this command to set the delay time in seconds before redirecting the supplicant to a
specified URL when the supplicant is authorized.
Use the variant no to reset the delay time set previously.
Syntax auth-web-server redirect-delay-time <5-60>
no auth-web-server redirect-delay-time
Default The default redirect delay time is 5 seconds.
Mode Global Configuration
Examples To set the delay time to 60 seconds for the web authentication server, use the following
commands:
To reset the delay time, use the following commands:
Validation
Command show auth-web-server
show running-config
Related Commands auth-web-server redirect-url
show auth-web-server
Parameter Description
redirect-delay-time Set the delay time before jumping to a specified
URL after the supplicant is authorized.
<5-60> The time in seconds.
awplus# configure terminal
awplus(config)# auth-web-server redirect-delay-time 60
awplus# configure terminal
awplus(config)# no auth-web-server redirect-delay-time