Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1442)

DHCP Snooping Commands
Software Reference for x310 Series Switches
56.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Related Commands arp security
show arp security interface
show arp security statistics
show log
snmp-server enable trap
clear arp security statistics
Use this command to clear ARP security statistics for the specified ports, or for all ports.
Syntax clear arp security statistics [interface <port-list>]
Mode Privileged Exec
Example To clear statistics for ARP security on interface port1.0.1, use the command:
Related Commands arp security violation
show arp security
show arp security statistics
Parameter Description
<port-list> The ports to clear statistics for. If no ports are specified, statistics are
cleared for all ports. The ports may be switch ports, or static or
dynamic link aggregators.
awplus# clear arp security statistics interface port1.0.1