Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1999)

RMON Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 74.11
show rmon statistics
Use this command to display the current values of the statistics for all the RMON statistics
collections currently defined on the device.
Syntax show rmon statistics
Mode User Exec and Privileged Exec
Example To display the current values of the statistics for all the RMON statistics collections, us the
commands:
Output Figure 74-3: Example output from the show rmon statistics command
Related Commands rmon collection stats
Note Only statistics for switch port interfaces, not for VLAN interfaces, can be shown.
awplus# show rmon statistics
awplus#show rmon statistics
rmon collection index 45
stats->ifindex = 4501
input packets 1279340, bytes 85858960, dropped 00, multicast packets 1272100
output packets 7306090, bytes 268724, multicast packets 7305660 broadcast
packets 290
rmon collection index 679
stats->ifindex = 5013
input packets 00, bytes 00, dropped 00, multicast packets 00
output packets 8554550, bytes 26777324, multicast packets 8546690 broadcast
packets 7720
Note The following etherStats counters are not currently available for Layer 3
interfaces:
■ etherStatsBroadcastPkts
■ etherStatsCRCAlignErrors
■ etherStatsUndersizePkts
■ etherStatsOversizePkts
■ etherStatsFragments
■ etherStatsJabbers
■ etherStatsCollisions
■ etherStatsPkts64Octets
■ etherStatsPkts65to127Octets
■ etherStatsPkts128to255Octets
■ etherStatsPkts256to511Octets
■ etherStatsPkts512to1023Octets
■ etherStatsPkts1024to1518Octets