Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1779)

SNMP Introduction
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 67.21
7. Set the IP address of the
TFTP server. atFilev2TftpIPAddr { atFilev2Tftp_4 1 } <ip-addr>
8. Check that no other
transfer is in progress, and
that the required
parameters have been set. atFilev2CopyBegin { atFilev2Operation 7 } Read: idle
9. Start the file transfer. atFilev2CopyBegin { atFilev2Operation 7 } Set: 1
10. Monitor file transfer
progress. atFilev2CopyBegin { atFilev2Operation 7 } Read:
In progress:
copying <src> -->
<dst>
or
Success:
copy <src> --> <dst>
success
or
Failure:
copy <src> --> <dst>
failure: <err-msg>
Table 67-5: Procedure for copying a file to or from a device using a TFTP server
Do this ...
By setting or reading this
MIB object ...
Whose object ID is ... To this value ...