Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 206)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
clock set
This command sets the time and date for the system clock.
Syntax clock set >
Mode Privileged Exec
Usage Configure the timezone before setting the local time. Otherwise, when you change the
timezone, the device applies the new offset to the local time.
Example To set the time and date on your system to 2pm on the 2nd of April 2007, use the
command:
Related Commands clock timezone
Parameter Description
Local time in 24-hour format
Day of the current month <1-31>
The first three letters of the current month.
Current year <2000-2035>
Note If Network Time Protocol (NTP) is enabled, then you cannot change the time or
date using this command. NTP maintains the clock automatically using an
external time source. If you wish to manually alter the time or date, you must
first disable NTP.
awplus# clock set 14:00:00 2 apr 2007