Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1731)

Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 64.33
show ip dhcp-relay
This command shows the configuration of the DHCP Relay Agent on each interface.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ip dhcp-relay [interface <interface-name>]
Mode User Exec and Privileged Exec
Example To display the DHCP Relay Agent’s configuration on the interface vlan100, use the
command:
Output Figure 64-8: Example output from the show ip dhcp-relay command
Related Commands ip dhcp-relay agent-option
ip dhcp-relay agent-option checking
ip dhcp-relay information policy
ip dhcp-relay maxhops
ip dhcp-relay server-address
Parameter Description
Name of a specific interface. This displays the DHCP
configuration for the specified interface only.
awplus# show ip dhcp-relay interface vlan100
DHCP Relay Service is enabled
vlan100 is up, line protocol is up
Maximum hop count is 10
Insertion of Relay Agent Option is disabled
Checking of Relay Agent Option is disabled
The Remote Id string for Relay Agent Option is 0000.cd28.074c
Relay information policy is to append new relay agent
information
List of servers : 192.168.1.200