Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1640)

AMF Commands
Software Reference for x310 Series Switches
60.52 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show atmf links
This commands display brief information about all the AMF links configured on the
selected node.
Syntax show atmf links [brief]
Mode User Exec and Privileged Exec
Example To display the AMF links brief details, use the following command:
Parameter Description
links AMF links.
brief Brief summary of AMF links configuration and status.
Building_2# show atmf links
or
Building_2# show atmf links brief
Figure 60-11: Sample output from the show atmf links brief command.
ATMF Links Brief:
Local Link Port ATMF Adjacent Adjacent Link
Port Type Status State Node Ifindex State
--------------------------------------------------------------------------------
sa1
Crosslink Up TwoWay Building_1 4501 Forwarding
1.0.1 Downlink Up Full Bld1_Floor_1 5001 Forwarding
1.0.2 Downlink Up Full Bld1_Floor_2 5003 Forwarding
1.0.3 Downlink Up Full Bld2_Floor_1 6101 Forwarding
Figure 60-12: Parameter definitions from the show atmf links detail command
Parameter Definition
Local Port Shows local port on the Node configured for AMF Network.
Link Type Shows link type as Uplink/Downlink (Parent and child) or Cross-link (Nodes in same
domain).
Port Status Shows status of the local port on the Node as UP/DOWN.
ATMF State Shows AMF state of the local port:
■ Init - Link is down.
■ Hold - Link transitioned to up state, but waiting for hold period to ensure link is
stable.
■ Incompatible - Neighbor rejected the link because of inconsistency in AMF
configurations.
■ OneWay - Link is up and has waited the hold down period and now attempting to
link to
■ another unit in another domain
■ Full - Link hello packets are sent and received from its neighbor with its own node id.
■ Shutdown - Link has been shut down by user configuration.
Adjacent Node Shows Adjacent AMF Node to this Node.
Adjacent IfIndex Shows interface on the Adjacent AMF Node connected to this Node.
Link State Shows state of AMF link Forwarding/Blocking.