Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1145)

Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 43.19
auth supplicant-mac
This command adds a supplicant (client device) mac address on a given interface with the
parameters as specified in the table below.
Use the no variant of this command to delete the supplicant MAC address added by the
auth supplicant-mac command, and resets to the default for the supplicant parameter.
Syntax auth supplicant <mac-addr>
[max-reauth-req <1-10>]
[port-control {auto | force-authorized | force-unauthorized |
skip-second-auth}]
[quiet-period <1-65535>]
[reauth-period <1-4294967295>]
[supp-timeout <1-65535>]
[server-timeout <1-65535>][reauthentication]
no auth supplicant-mac [reauthentication]
Parameter Description
<mac-addr> MAC (hardware) address of the Supplicant entry in
HHHH.HHHH.HHHH MAC address hexadecimal format.
port-control Port control commands.
auto Allow port client to negotiate authentication.
force-authorized Force port state to authorized.
force-unauthorized Force port state to unauthorized.
skip-second-auth Skip the second authentication.
quiet-period Quiet period in the HELD state (default 60 seconds).
<1-65535> Seconds for quiet period.
reauth-period Seconds between reauthorization attempts (default 3600
seconds).
<1-4294967295> Seconds for reauthorization attempts (reauth-period).
supp-timeout Supplicant response timeout (default 30 seconds).
<1-65535> Seconds for supplicant response timeout.
server-timeout Authentication server response timeout (default 30
seconds).
<1-65535> Seconds for authentication server response timeout.
reauthentication Enable reauthentication on a port.
max-reauth-req No of reauthentication attempts before becoming
unauthorized (default 2).
<1-10> Count of reauthentication attempts.