Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1185)

Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 43.59
auth-web-server sslport
This command sets the HTTPS port number for the web authentication server feature.
Use the no variant of this command to reset the HTTPS port number to the default port
number (443) for the web authentication server feature.
Syntax auth-web-server sslport <1-65535>
no auth-web-server sslport
Default The HTTPS port number for the web authentication server feature is set to 443 by default.
Mode Global Configuration
Examples To set the HTTPS port number to 4433 for the web authentication server, use the
command:
To reset the HTTPS port number for the web authentication server to the default (443),
use the command:
Validation
Commands
show auth-web
show auth-web-server
show running-config
Parameter Description
<1-65535> Set the local web authentication server port within the
TCP port number range 1to 65535.
awplus# configure terminal
awplus(config)# auth-web-server sslport 4433
awplus# configure terminal
awplus(config)# no auth-web-server sslport