Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 526)

Spanning Tree Commands
Software Reference for x310 Series Switches
19.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
spanning-tree cisco-interoperability (MSTP)
Use this command to enable/disable Cisco-interoperability for MSTP.
Use this command for MSTP only.
Syntax spanning-tree cisco-interoperability {enable|disable}
Default If this command is not used, Cisco interoperability is disabled.
Mode Global Configuration
Usage For compatibility with certain Cisco devices, all devices in the switched LAN running the
AlliedWare Plus
TM
Operating System must have Cisco-interoperability enabled. When the
AlliedWare Plus
TM
Operating System is interoperating with Cisco, the only criteria used to
classify a region are the region name and revision level. VLAN to instance mapping is not
used to classify regions when interoperating with Cisco.
Examples To enable Cisco interoperability on a Layer 2 switch:
To disable Cisco interoperability on a Layer 2 switch:
Parameter Description
enable Enable Cisco interoperability for MSTP.
disable Disable Cisco interoperability for MSTP.
awplus# configure terminal
awplus(config)# spanning-tree cisco-interoperability enable
awplus# configure terminal
awplus(config)# spanning-tree cisco-interoperability disable