Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 580)

Link Aggregation Commands
Software Reference for x310 Series Switches
21.14 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show lacp-counter
Use this command to display the packet traffic on all ports of all present LACP aggregators,
or a given LACP aggregator.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show lacp-counter [<1-32>]
Mode User Exec and Privileged Exec
Example
Output Figure 21-7: Example output from the show lacp-counter command
show lacp sys-id
Use this command to display the LACP system ID and priority.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show lacp sys-id
Mode User Exec and Privileged Exec
Example
Output Figure 21-8: Example output from the show lacp sys-id command
Parameter Description
<1-32> Channel-group number.
awplus# show lacp-counter 2
% Traffic statistics
Port LACPDUs Marker Pckt err
Sent Recv Sent Recv Sent Recv
% Aggregator po2 (4604)
port1.0.2 0 0 0 0 0 0
awplus# show lacp sys-id
% System Priority: 0x8000 (32768)
% MAC Address: 00-00-cd-24-fd-29