Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1437)

DHCP Snooping Introduction and Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 55.15
Troubleshooting DHCP snooping
42.
awplus#
show ip dhcp snooping binding Check all entries in the DHCP snooping
database.
43.
awplus#
show ip source binding Check the static entries in the DHCP snooping
database.
44.
awplus#
show ip dhcp snooping statistics
[detail] [interface ]
clear ip dhcp snooping statistics
[interface ]
Check DHCP snooping statistics.
45.
awplus#
show arp security statistics [detail]
[interface ]
clear arp security statistics
[interface ]
Check ARP security statistics.
46.
awplus#
debug ip dhcp snooping {all|acl|db|
packet [detail]}
show debugging ip dhcp snooping
debug arp security
show debugging arp security
Enable debug output for DHCP snooping and/or
ARP security.
47.
If you have not already set the switch to log
DHCP snooping and ARP security violations, you
can do this for troubleshooting purposes. See
Step 37 on page 55.14 .
48.
awplus#
show log Display the contents of the buffered log,
including any DHCP snooping log and debug
messages. (See also
Chapter 10, Logging
Commands .)
Table 55-2: General configuration procedure for DHCP snooping(cont.)