Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1653)

AMF Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 60.65
show atmf nodes
This command displays all nodes currently configured within the AMF network. It displays
a topographical representation of the network infrastructure.
This command displays a summary of all virtual links currently in the running
configuration.
Syntax show atmf nodes
Mode Privileged Exec
Example To display AMF information for all nodes in the AMF, use the command:
Parameter Description
show Show running system information
atmf Allied Telesis Management Framework (AMF)
nodes AMF Node information.
node_1# show atmf nodes
Figure 60-19: Sample output from the show atmf nodes command.
node1#show atmf nodes
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device ATMF Node
Name Type Master SC Parent Depth
--------------------------------------------------------------------------------
Building_1
AT-SBx8112 Y C - 0
* Building_2 x900-12XT/S Y N - 0
Bld1_Floor_1 SwitchBlade x908 N S Building_1 1
Bld1_Floor_2 x600-24Ts/XP N N Building_1 1
Bld2_Floor_1 x610-24Ts-POE+ N N Building_1 1
SW_Team1 x210-24GT N N Bld1_Floor_2 2
Current ATMF node count 8