Show counter stack – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 2146

Stacking Commands
Software Reference for x310 Series Switches
83.6
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show counter stack
Use this command to display stack related counter information.
Syntax
show counter stack
Default
All counters are reset when the stack member is rebooted.
Mode
User Exec and Privileged Exec
Usage
This displays the stacking counter information for every stack member.
Examples
To display the stacking counter information about the whole stack, use the following
command.
awplus#
show counter stack
Figure 83-1: Example output from the show counter stack command
Virtual Chassis Stacking counters
Stack member 1:
Topology Event counters
Units joined ......... 1
Units left ......... 0
Links up ......... 1
Links down ......... 0
ID conflict ......... 0
Master conflict ......... 0
Master failover ......... 0
Master elected ......... 1
Master discovered ......... 0
SW autoupgrades ......... 0
Stack Port 1 Topology Event counters
Link up ......... 3
Link down ......... 2
Nbr re-init ......... 0
Nbr incompatible ......... 0
Nbr 2way comms ......... 1
Nbr full comms ......... 1
Stack Port 2 Topology Event counters
Link up ......... 0
Link down ......... 0
Nbr re-init ......... 0
Nbr incompatible ......... 0
Nbr 2way comms ......... 0
Nbr full comms ......... 0